Stormforce 11m – Fly Bridge

Background

The Stormforce 11 is the flagship in our range, and offers the best that RIBs can offer. The 11 was a natural development from the 9.1, due to customer demand for a larger RIB. Puffin Dive Centre in Oban took the first two boats out of the mould for their operations on the West Coast of Scotland. Since then, the 11 has developed and continued to grow in its popularity; every 11m RIB is unique and customised according to the customer’s requirements.

The Cabin version is what we would consider the ultimate for offshore cruising. The latest generation is fully decked – truly unique among Ribs The Full GRP Cabin is fitted with Seaglaze toughened marine grade safety windows. In terrible conditions offshore it is reassuring to know that you have the fantastic seakeeping of the 11m hull underneath you, with the safety and comfort of a cabin. Arrive at your destination warm, dry and relaxed, having experienced the joy of what has been termed “the finest RIB available today”.

Configuration

The Fly-bridge cabin layout is totally customisable to the owner’s specific requirements. The entry door can be place to port, straboard or centrally, depending on customer preference.

Inside, a spacious double berth is fitted in the bow section of the RIB with a second one under the fly-brige deck In the main cabin. Aswith all Fly-bridges there are two sets of controls one on the in the pilot house and a second mounted on the on a raised section of the aft deck. All instrumentation and navigation  is repeated at the two helm positions. The pilot house can be configure with two or four suspension setas a galley and a toilet/shower compartment.

At the stern is a dedicated engine compartment, with plenty of space for working around a twin installation. On the after end of the vessel the raised engine breathing boxes create a very comfortable external seating positions protected by the security of the one metre high pushpit rails.

Fitout can be completed with Teak & Holly flooring, and many customers specify custom bespoke Red Cherry or oak panelling and furniture. Decks can be finished with either our High Grade Non-Slip surface or Tek-Deck.

Get In Touch

The Stormforce range continues to grow and we thank your support.  Having studied range details below, should you have any questions whatsoever please do not hesitate to get in touch.

Design Data

Length Overall: 11.00 metres

Waterline Length: 9.42 metres

Beam Overall: 3.31 metres

Waterline Beam: 2.70 metres

Draft: 0.50 meters

Displacement: 5-6 tonnes

Design Category: B

DSC_6115

Stormforce 11m can be fitted with any engine arrangement including:

  • Twin Inboard Diesel Sterndrives

  • Twin Outboards

  • Twin Inboard Jets

DSC_0179
DSC_4006

The 11m Fly-Bridge entry door can be place to port, starboard or centrally, depending on customer preference.

DSC_6573
DSC_6557
IMG_2480

The Fly-Bridge configuration is open to a number of different layout options. Our most popular, having 2 suspension seats with a small galley and toilet fitted astern, with a spacious double berth located under the entrance steps.

We like to work closely with our customers to design a bespoke interior that will suit their specification

IMG_2446
IMG_2466
DSC_0695

Full GRP toilet room, which can double as a wet room. With options for shower facilities

DSC_6577
DSC_1507

Our latest build had us putting a flat bow on our 11m with a bow door so that passengers can board from a bow berth

DSC_1586
teak deaks 2

Using advanced 3D CAD Software we can model any boat to any spec which allows the customer to tweak the design of the boat to their liking

Loch Lomond 20