Stormforce 11m – Explorer X Cabin

Background

The Stormforce 11 is the flagship in our range, and offers the best that RIBs can offer. The 11 was a natural development from the 9.1, due to customer demand for a larger RIB. Puffin Dive Centre in Oban took the first two boats out of the mould for their operations on the West Coast of Scotland. Since then, the 11 has developed and continued to grow in its popularity; every 11m RIB is unique and customised according to the customer’s requirements.

The Cabin version is what we would consider the ultimate for offshore cruising. The latest generation is fully decked – truly unique among Ribs The Full GRP Cabin is fitted with Seaglaze toughened marine grade safety windows. In terrible conditions offshore it is reassuring to know that you have the fantastic seakeeping of the 11m hull underneath you, with the safety and comfort of a cabin. Arrive at your destination warm, dry and relaxed, having experienced the joy of what has been termed “the finest RIB available today”.

Configuration

The Explorer Cabin layout is totally customisable to the owner’s specific requirements. Aft cockpit versions are available if necessary, for example, to fit a wheel chair lift. Similarly, the Cabin can also be shorted to create a large working cockpit if required.

Inside, a spacious double berth is fitted in the bow of the RIB. In the main cabin, the controls console is mounted forward, with plenty of space for todays modern navigational equipment. The layout of the rest of the cabin is left to the customer to decide. The typical offshore cruising layout is four KAB Air Sprung Seats and two aft benches. However, a toilet cubicle and galley are also becoming very popular.

At the stern is a dedicated engine compartment, with plenty of space for working around a twin installation. Between the engine compartment and the main cabin, dependent on the version, a large storage locker is provided extending the full width of the vessel.

Fitout can be completed with Teak & Holly flooring, and many customers specify custom bespoke Red Cherry paneling and furniture. Decks can be finished with either our High Grade Non-Slip surface or Tek-Deck.

Get In Touch

The Stormforce range continues to grow and we thank your support.  Having studied range details below, should you have any questions whatsoever please do not hesitate to get in touch.

Design Data

Length Overall: 11.00 metres

Waterline Length: 9.42 metres

Beam Overall: 3.31 metres

Waterline Beam: 2.70 metres

Draft: 0.50 meters

Displacement: 5-6 tonnes

Design Category: B

DSC_6115

Stormforce 11m can be fitted with any engine arrangement including:

  • Twin Inboard Diesel Sterndrives

  • Twin Outboards

  • Twin Inboard Jets

DSC_0179
DSC_1486

With the 11 metres large cabin, the seating arrangement can be full customisable

to suit the customers specification. Our most popular layout is 4 suspension seats

with 2 long rear bench seats

DSC_1485
DSC_0695

Full GRP toilet room, which can double as a wet room. With options for shower facilities

DSC_9786
DSC_1507

Our latest build had us putting a flat bow on our 11m with a bow door so that passengers can board from a bow berth

DSC_1586
DSC_1218

An outer Steering position can be fitted for more visibility when docking

teak deaks 2

Using advanced 3D CAD Software we can model any boat to any spec which allows the customer to tweak the design of the boat to their liking

Loch Lomond 20